Airsoft Paintball Gear

Crosman Copperhead 6000 Copper Coated BBs in a Bottle


 

Crosman Copperhead 6000 Copper Coated BBs in a Bottle

Product Description

Go To Store

1000 Bag .12g 6mm BBs for Airsoft Guns


 

1000 Bag .12g 6mm BBs for Airsoft Guns

Product Description

Go To Store

Heavy M4 M16 Replica Airsoft Gun Double Eagle M83 A2 Full Automatic Electric Rifle


 

Heavy M4 M16 Replica Airsoft Gun Double Eagle M83 A2 Full Automatic Electric Rifle

Product Description

Go To Store

Crosman Destroyer .177 Cal, 7.9 Grains, Pointed, 250ct


 

Crosman Destroyer .177 Cal, 7.9 Grains, Pointed, 250ct

Product Description

Go To Store

Magazine for M4 M16 (M83 Only) Airsoft Electric Gun


 

Magazine for M4 M16 (M83 Only) Airsoft Electric Gun

Product Description

Go To Store

Crosman AirSoft 5,000 ct. Bottle White Heavy AirSoft BBs


 

Crosman AirSoft 5,000 ct. Bottle White Heavy AirSoft BBs

Product Description

Go To Store

Spring Loaded Full Metal Gear Pistol Airsoft Gun.


 

Spring Loaded Full Metal Gear Pistol Airsoft Gun.

Product Description

Go To Store

Airsoft 6mm BB 0.2g 1Kg 5,000 Pellet Bag


 

Airsoft 6mm BB 0.2g 1Kg 5,000 Pellet Bag

Product Description

Go To Store

Crosman AirSoft Air Magazine C11 CO2 Powered AirSoft gun


 

Crosman AirSoft Air Magazine C11 CO2 Powered AirSoft gun

Product Description

Go To Store

Spring Heavy Weight 1911 Pistol Airsoft Gun YT385 FPS-240


 

Spring Heavy Weight 1911 Pistol Airsoft Gun YT385 FPS-240

Product Description

Go To Store

 

Airsoft Bb Weight

The bb is the nickname used to refer to the balls of 6mm ammunition used in airsoft replicas. Current regulations require biodegradable balls to play with most airsoft fields to prevent the degradation of them. There are different weights for balls airsoft (bb from now) and depending on the reply that you use is better to use one or the other. Before explaining the different weights will make a brief explanation of how your reply. Most replica airsoft 6mm bb firing, although some models operate with 8mm bb they are not allowed in most airsoft fields since being bigger bite much more. Operating in an AEG is very simple: in all AEG with a minimum of quality is the famous hop up system. This system consists of a small rubber just above the canyon. When this happens bb rubber bearings there is a difference between the inner metal barrel and rubber, usually rubber ball. Since this difference of friction at the top of the ball in contact with the rubber, it generates a speed difference between the upper and lower bb. This causes the ball slowly away as you can see in the picture below. What do you get with this system? as that being constantly turning the bb is less wind resistance and therefore increase the effective range shooting, as well as accuracy. Once explained the theory of operation of firing a pass to AEG bb rates available. The weights of bb 0.10gy ranging from the 40g. 0.10 0.12 and 0.15 g: Due to the short weight of these balls do not suffer from the effect hop up so they are pretty useless to use them in open environments. Only worth it in CQB environments, though most opt directly by 0.20g. 0.20g: is the weight used by most airsofteros due to its power-weight ratio. Balls are quite useful for short replies (pistols, submachine guns) and AEGs that are not supportive or sniper. On windy days can give you more of a headache. 0.25g: This weight is very useful to select and handle roles that support and enhance their power at 450fps loss of yards through the brunt of this bb is compensated more accurately. APS Maruzen 0.29g; these are very exclusive Maruzen, have created a unique type of ball for their sniper rifles. That said, if you have a replica Maruzen and in particular a model APS these are your balls (easy joke omitted). 0.30g: from this burden and we talk about sniper ammo. The trajectory of the ball will be much more straight and accurate to the detriment of the distance range but the truth is worth. There bb of this weight aluminum, more accurate, but are banned in most airsoft fields Spanish. 0.36g: This weight is another issue. It is used especially in marksmanship. This weight decreases alarmingly power trip that is used by elite shooters who want accuracy at close range and aim in general. 0.40g: the heavy weight of the balls. This weight must be used only by very experienced snipers. Why? because of their weight the ball goes so much slower to hit a target must take into account the fall of the ball, speed and even the sound generated by the shot. To avoid the latter often use homemade silencers to avoid betraying his position. If you see a player with this type of ammunition pray that he is on your computer.
It deviates a bit from the scope of the airsoft MadBull, which gives us news of her Unmanned Aerial Vehicle (UAV), an autonomous flying drone piloted by embedding a GPS and camera whose feed is sent live on the remote . You can watch a video in the following test of this UAV in the field, which could enrich many scenarios or just to film parts of our sky. But do not dream too much, the price may make you come back to earth pretty quickly!. This baby should be placed on the market in late 2010. This is not a toy but a UAV (Unmanned Aircraft Vehicle) semi-military controlled GPS. The screen of the remote allows you to view live video stream of the UAV. GPS control. More details about the features soon. Price estimate: $ 15,000 or approximately € 11,800. (This is not strictly speaking of cheap ... but considering that it is a semi-military drone, it's cheap!). Created by electronics engineers Yong Jiou Labs, a company affiliated with MadBull who has realized the MadBull chrony, and the hop-up Ultimate LET and Stroke Unit (forthcoming). Having 10 years of model airplanes, I go for something like 2000 euros maxi great (in my opinion is a wide margin), all inclusive. (In an era of price study led me to a little over 1,000 euros for a good system). totally agree with Max, a good thermal avioracing raptor would work better, and more is powerful enough to mount on a Marui AEG additional channel receiver!. Yes there 's people who are rich and make the airsoft, but at this point I do not think so. Before I would buy more than a Toyota pickup that I used paint in tan and bring him a M2HB on top, two M60 and M82 with a M249 rear passenger to edit window and it cost me less. And it would be much more useful ingame. go see it in maximusracing make UAV with GPS, FPV, fire engines and many other. They can make UAVs dimensional allowance and the price starts about right worm € 500. From the videos, the discretion is at the top level (the noise of a lawn mower is top to Recce) .... Also, remember that the Chinese have laid a model (but not like this model chopper), discoverable, yes but where? for the sum of moditication 150th. And for a homemade robot, kind Minesweeper ODL can install this type of camera that reacts to movement of the head. Drone Parrot, driven by iPhone, two cameras (vertical and horizontal), capable of measuring the velocity of an object and the distance between the UAV. And for those wishing to make a robot minesweeper kind of CQB EOD to behold the little accessories that you will have a camera which tracks the movement of the head. The idea of thermal helicopter armed with a gun combo + GB + Electrical hicap dévelloppement is my home, but I think AC is still a dangerous game (I think in case of crash). The idea of an AEG or GBB on a UAV is perhaps not the best because too many factors comes into play: weight, bump up the shooting had to disrupt the flight, shooting almost useless without an aim worthy of the name , resulting in a high power (minimum 410 fps), range, noise (because it is clear that the installation of a launcher can not be done on an electric drone, use of heat to be worthy of the thrust name ...).The UAV can be very effective if the use remains in the field of observation, a camera does not weigh very heavy: the drone to be equipped with brushless little (very silent beyond 50 meters). ..

Users That Faved This

 

Fresh RSS  Recommended RSS  Contact  Terms