The original ion was released in 2005, and soon increased in popularity, but was often criticized for being difficult to disassemble and maintain. [2] Smart Parts addressed these concerns in 2007 with the release of the Ion XE, which offers the ability to remove pin back marker. [3]. The recipient of the ion is in a rear compartment of wood, both hard-anodized. Its grip frame and ASA are both made of diecast aluminum and is powder-coated. The outer shell of the Ion is polymer. The ion includes the vision system, infrared transmitter and receiver on either side of the compartment. This prevents ion firing when a ball is not fully charged in the chamber, reducing the number of balls "slices." The Ion is notable for being highly customizable: is lined in a removable polymer shell, which comes in several different colors. This shell can also be replaced by aftermarket "body kits" to change the appearance of the ion, similar to the kits available for Tippmann A5 marker and others. In addition to these body kits, several pieces of aftermarket parts (such as triggers and feednecks) are available. The Ion board is manufactured in two forms: a thought for distribution in the United States and others for distribution in the UK. The UK version of the board has not erupted or fully automatic modes of firewood and is identified by the green power LED. The U.S. version of the board includes all firing modes and has a red power LED. This board can also be replaced by a number of aftermarket boards (such as Blackheart board or virtue) that offer greater control over the timing of the firing action of the various firing modes, and a higher maximum rate of fire, in most cases limited only by the mechanical capabilites marker itself. [4]. Due to the large number of aftermarket upgrades available, the ion can be customized or action used to hold his own in today's fast-paced speedball tournaments. It can also be easily done in a competent woodsball marker. Internally, the Ion offers design spool-valve, similar to a Shocker SFT or Matrix of the dye. However, the operation of the ion is somewhat simpler than a Shocker SFT or matrix that does not use a 4 way solenoid valve. The solenoid valve of the ion has only three hoses: one to supply air to the solenoid, one to supply air to a tank compartment behind the pin, and one that provides the air in front of the bolt to hold back while that the marker is at rest. The solenoid thus directs air either to the front of the bolt to not fire, or air tank behind the bolt, to blow front. When you turn the ion, the air in front of the bolt that holds back is drained back through the solenoid, it does in the back of the firing chamber to blow the bolt forward. To expedite the drainage of air from the front of the bolt, many users add a quick exhaust valve (QEV) to their score. The QEV replaces a garrison ion in the body and allows air to drain expressed in the body cavity instead of going all the way back through the solenoid.Allowing air to express more quickly, this allows the bolt to close faster and with more force, which allows the user to lower the operating pressure and / or time the solenoid valve is open (detention). The QEV also acts as a grease trap for the parts would get normally in the solenoid and possibly cause problems. Airgun Designs, APS (fomerly WDP), DYE precision, Empire, Indian Creek Designs, JT Sports, Kingman Group, Smart Parts, Special Ops Paintball, Tippmann, Worr Game Products (WGP). List of professional paintball teams, Russian Legion, NCPA (paintball), Oliver Lang, Last League Paintball arena, List of paintball leagues, NXL, National Professional Paintball League. ..
Matrix system uses a spool valve to propel a paintball. The spool valve uses a scaling with a fixed volume and a source of regulated air to provide a coherent force to each ball that is shot. The valve operates on a spool that slides back and forth like a piston. A position the coil allows the tube set to be completed. In firing position the coil lead and empty the contents of the tube fixed in the breech of the marker, which in turn set fire paintball. The movement of the coil is controlled by the flow of air to it. This air flow is controlled by a solenoid (electronically actuated valve). Matrix will see smooth and lack of external pipes can become damaged over time. The gas is instead driven by passages inside the body of the tag and branch in the front and back of the livelihood of these passages sealed marker. A low pressure regulator can also be attached to the front of the marker to help consistency and to help lower the force of air striking the ball. Matrix also includes a removable head. The head can be removed via a rod that runs the entire length of the body. The current head is threaded to accept threaded barrels per Autococker and a pair of rubber ball detents. Triggers can be easily removed and cleaned or replaced using a selection of rings to remove them and a hex key to push them back in.. Manners completely removable sheets for the breech aftermarket manufactures to develop new and improved cylinder heads. A single push-button on the back of the frame allows the marker to switch the marker off and modes on it, safe and fire respectively. The current card factory Matrix has only a semi-automatic firing, preparing for tournament play. The kernel of the map is a PIC16C54C microcontroller. This microprocessor is programmable in several programming languages including C and assembler. The PIC that Matrix is used as a bushing installed to allow different pieces of `'containing different software to swap in and out rather quickly. These pieces may contain the new software for additional features like Matrix which can use it: alternative firing, timers, infrared detection systems and ball. The PIC uses four dip switches mounted on the board to select timings for the duration of the stay bolt forward and the amount of delay between shots fired. The first two switches dictate how long the bolt remains in the firing position. The second two switches control the length of delay between shots all a ball to fall into the breech and fire. The combination of these two settings determines the maximum rate of fire for Matrix. Mounted vertically in front of the Matrix is the integrated regulator. This regulator has two functions: the first of which reduces the air pressure coming into the marker before he enters the marker, the second of these functions is to act as a handle to stabilize earlier hold the marker.The controller is because Matrix operates at low pressure, about 140 pounds per square inch necessary. Since the amount of air used to fire a paintball is a fixed quantity, the pressure that allows the air in the marker is what controls the speed at which the paintball is shot. Change the amount of pressure allowed in the marker changes alternately speed: lower pressure results in a lower gear. The Matrix allows the regulator to CO2 or compressed air to use as a propellant. Airgun designs, Aps (fomerly WDP), DYE Precision, Empire, Indian Creek Designs, JT Sports, Kingman Group, Smart Parts, Special Ops Paintball, Tippmann, game Worris Products (WGP). List of professional paintball teams, Russian Legion, NCPA (paintball), Oliver Lang, League final Paintball Arena, List of paintball leagues, NXL, National Professional Paintball League. ..

Super 9 bolt action rifle, Black airsoft gun was bookmarked by from ,

Brass Eagle MK T-Storm C1 Tac Players Kit was recommended by from ,

TechT Paintball MRT Delrin Bad Karma Pro Series X7 Phenom Bolt w/ Phaze-5 Fitting was rated 8 by from ,

TechT Paintball MRT Delrin Bad Karma Pro Series X7 Phenom Bolt w/ Phaze-5 Fitting was bookmarked by from ,

2011 Proto PMR Rail Paintball Gun - Blue Dust was bookmarked by from ,

Spyder Electronic Universal Top & Side Cocking ACS Bolt was bookmarked by from ,

TechT Paintball MRT Delrin Bad Karma Pro Series X7 Phenom Bolt w/ Phaze-5 Fitting was rated 6 by from ,

TechT Paintball MRT Delrin Bad Karma Pro Series X7 Phenom Bolt w/ Phaze-5 Fitting was rated 8 by from ,

AGM L96 AWP Spring Airsoft Sniper Gun OD was bought by from ,