Ok, this is the photo of Mr2 body which has had an accident. A piece that holds "the ball stopper" or paintaballs retainer and the electronic eye, the day I went to try, was shattered. But being a part, not so critical, and knowing that in Mexico there are not many pieces, I decided to replace it by a hand-made. The part that holds the paintballs, and what looks like a LED infrared LED is suppose to detect when a paintball in the chamber and allows for a shot, this metaphor every time you fire the marker has a bullet and avoided the anti-chop. Spyder calls this anti-chop eye system, here the detail of the "ball stopper". From the outset, the first problem was the selection of material. The piece of plastic, offers some flexibility and strength at the same time, therefore ought to be a material that could offer me the same thing. First thought in aluminum, but where to find someone to cut my part, fast, easy and not expensive, then I thought of a material that had already handled: The balsa wood. The balsa wood, wood is very soft, but that cut into small pieces, are more resistant, in addition, he could get is stationary as lumen and could handle very easily with a dremel, so I went and bought the wood thickness balsa most approached him. Right now I do not remember the mm of thickness, but hey, my first attempt is as follows:. Pretty ugly and crooked. With this version of the repair, we went to a play at the field of seven streams. The first move, I could not participate, because the marker is not firing correctly. However, had already shot, at least on the probe. That day the shoot without my "fix" so I assumed that the repair was the problem, and indeed it was. Apparently, the thickness of my repair is lower, therefore the screw that holds the piece as it leaves the chamber in the marker, prevented this operate correctly. The solution was to loosen up the part and the marker behaved perfectly. The intent today is to make this piece better. The piece of balsa wood, it looks a little higher so that I did have a greater margin for error when making the piece fit best. The counterpart of the piece, has some degree of complication, because there is a channel in which the LED comes with cables, to replicate this, I pressed a little balsa wood, using its smoothness, to mark where the LED is pressing and became a channel, trying to have the same angle as the original part:. Now, the next challenge was the mark where the hole should go for the screw. As the piece begins to be different, instead of taking the employer to calculate the location of the space for the screw. Make a pencil mark around the hole in the marker and press the piece of wood on the area, to transfer (much to the CSI), the timber will be marked the position of the screw. Now, to give a little more structural strength to the piece of wood, gave him a white resitol coating to dry, creating a protective layer. The first was to measure the screw, which turns out to be a 4mm screw, so use a 3mm drill so that, taking advantage of the softness of balsa wood, the screw just as shown at once. Once perforated insert, the jacket carefully and trying to make it less ugly as possible, which I can say that I feel satisfied, and here we see the piece lined and fitted.The marker at the end is as follows, is hereby accepted, maybe a little shiny. I think this piece if I will last longer than the last. Also verified that the screw will not invade the bedroom, so now I hope that fire perfectly from the first paintball. hello friend, I like your blogg, but it is the reason why I write, I have a gotcha spyder victor, some friends and I made the purchase in August of this marker, so economical, to see if we liked, one month take them and test, we are looking to make changes, and I think we chose the MR2 w / eye, qeu that works for you? and materials such good quality? I saw that broke the part of the eye, and the first game, that wave, so that the plastic Chafer or what happened?? you recommend more, the VS2 or MR2, here the address of our blogg, where you can see the field type qeu have and where we play. one can say that is a barn, is a packing of beans, and this double the field, but prefer not to use it for that, if they do, would be to build houses or mazes and play clos quarter, to avoid staining the bricks or leave well drawn, the court pro now is fine, we are planning to create another field on a ranch 15 minutes from here, SOMSO of Durango, and we are a group of friends, so that we ourselves conditioning in the field and is for fun, not business and if we saw the gun, the worse the end the group decided not to change, we're scared of the other pro clubs here, because of their automatic weapons, but na, the gun does not make them win, we are well prepared with our spyder victor ( hehehe, something changed vdd, then you show it), is the advantage of a mechanism, it can lead to the end and make changes without concern, yesterday we tried the new inventions and are not fast enough to shoot, and does not chop, I duraremos other 2 months with this marker and then think about any changes, and is only 1 month tenemso this sport, but if I see a good future. ..

Spyder Victor Paintball Gun w/Super Paintball Body Bag Package was recommended by from ,

Spyder Sonix Paintball Gun Marker MEGA Set - Olive was added to shopping list by from ,

Spyder MR1 Tactical Paintball Marker Gun SNIPER SET was bookmarked by from ,

Spyder Victor Paintball Gun Marker MEGA Package - Silver was recommended by from ,

Spyder Victor Paintball Gun 6+1 9oz Mega Set - Black was added to shopping list by from ,

Kingman Spyder Victor Semi-Auto Paintball Marker was rated 5 by from ,

Spyder MR1 Tactical Paintball Marker Gun SNIPER SET was bookmarked by from ,

Spyder Paintball Victor Gun Marker Package (Black) was bought by from ,

Kingman Spyder Victor Semi-Auto Paintball Marker was rated 7 by from ,